Code 3 3692L4 V-Con Siren

This V-Con siren is a full feature electronic siren with the added Hi-Lo tone along with the standard Wail, Yelp, and Air Horn tones. Also includes hard-wired microphone and 3 position progressive slide switch and 4 button push-on/push-off light control switches. Also includes public address and radio rebroadcast options. This siren is energy-efficient, with solid state technology that offers the best combination of features and value in the industry.

Code 3 3892L6-LA-P Mastercom (Bulk Pack)

Prepped A build Mastercom Full Feature 100-Watt Siren. Comes with Light Alert Hard-Wire PA Microphone, Electronic Air Horn, Siren Lock, 6 Standard Push On/Off Buttons and 3 Level Slide Switch.POSITIVE HORN RING, LIGHT ALERT IN POSITION 3 AND SWITCH C TIMED.

No Box No Instructions

Code 3 Remote Compact Siren:

3997 Code 3 Remote Siren Basic RLS siren, 200w output, with Arrowstik control

Code 3 Remote Lighted Siren

3999 Code 3 Remote Siren RLS Deluxe model Siren, 200w output

Code 3 Remote Lighted Siren

Feature Siren with PA, Hard Wired Microphone, Airhorn, and Tap II

• Full featured 100 or 200-watt models with hi-lo or priority tones available
• High reliability and performance is achieved by means of integrated circuits and surface mount technology
• User selectable switching for horn ring tap and press/hold, manual horn/siren, and radio rebroadcast
• Fused circuit failure protection, front panel PA volume control, and built-in noise canceling microphone available

E-Q2B Federal Signal

Sirens & Speakers

• 200-watt siren system features Q wail, yelp, air horn, PA, radio rebroadcast, and
  Q Brake
• 122 decibels at 10 feet
• Low current draw, only 30 amps continuous
• Foot switch compatible
• Noise canceling microphone included

Digital Signal Processor (DSP) technology creates the familiar Q

Siren, 650 Series, 100W, microphone push-button controlled, full featured, wail/no wail tone activation, (8) 10 amp relay outputs

650 Series Remote Siren 650001 Undercover Siren

66000 Federal Signal 6-Button Programmable Serial Controller

• For use for light control for any serial communication lightbar platform (Use for applications for lights only, no sirens.)
• Available as a stand alone unit, Model 660000, or as an option for the Legend, Raydian S2, and Arjent S2 LED lightbars
• An alternative to the standard interface module with separate switch controls for the lightbar
• Features six illuminated push button switches and a four-position slide switch with LED indicator lamps
• Plug-n-play allows quick installation using existing lightbar computer cable
• Six pre-programmed keypad configurations, containing between one to three flashing modes, each producing one of eight distinct flash patterns
• Quick and easy flash pattern and keypad configuration selection
• Additional lightbar functions include: front or rear light cutoff, takedown or alley lights, work lights, low power mode, and directional signals
• Siren tones not included
• Includes Velcro dash mount and swivel mount
• Applications: Tow and recovery vehicles, utility vehicles, DOT, pick-up trucks, command vehicles, and any other vehicle that operates without a siren